-
ENPAC簡介
...
-
PIERCAN簡介
...
-
Justrite簡介
...
-
HONEYWELL簡介
...
-
Whatman簡介
...
-
Brady簡介
...
離心管 氟塑料
-
累计销量0 累计评价0 - :氟塑料離心管
- :多種型號
- :進口品牌
- :1
- :部分型號常備庫存
- :氟塑料離心管,是高速離心處理腐蝕性化學品的理想選擇,尤其適合用冷凍離心機在50000xg離心速度下萃取氯仿和苯酚。
-
特氟龍圓底離心管/ 氟塑料離心管/Teflon*FEP離心管
Nalgene 3114 Oak RidgeHigh-Speed Centrifuge Tubes
基本特點Features:
◆用途與離心速度:可用于高達50,000 XG的冷凍和非冷凍離心機上。
Can be used up to 50,000 x g in refrigerated and non-refrigerated centrifuges.
◆用途與性能:是高速離心處理腐蝕性化學品的理想選擇,尤其適合用冷凍離心機在50000xg離心速度下萃取氯仿和苯酚。對于所有的酸、堿、溶劑和活潑的化學藥品具有極佳的化學耐受性。Conduct high-speed centrifugation of aggressive chemicals, specifically suited for chloroform and phenol extractions in refrigerated machines up to 50,000 x g.Excellent for chloroform and phenol extractions. Resist any acid, base or solvent, aggressive chemicals.
◆材質:特氟隆管體,特氟隆螺旋蓋。Materials: Teflon* FEP,Tefzel* ETFE Screw Closure.
◆圓底離心管:適合高速離心機。Round bottom to fit high speed rotors.
◆Oak Ridge 離心管:Nalgene Oak Ridge 離心管標配(隨附)無襯墊的聚丙烯螺旋蓋,容易清洗,并能保證在10000 x g 的離心速度下防漏。Comes with polypropylene linerless closures—easy to clean and provides leak proof protection under normal conditions up to 10,000 x g.
◆螺旋蓋:標配普通螺旋蓋,當高速離心時為了確保防漏,部分型號有密封螺旋蓋供選配(貨號DS3131)。
Tefzel ETFE screw caps. Leakproof† Tefzel™ ETFE closures prevent material loss under ordinary use for most spins <10,000 × g.NALGENE Additional sealing cap assemblies (Cat. No. DS3131 series) are available. Optional sealing caps available — DS3131-0020 (for 30mL tube) and DS3131-0024 (for 50mL tube).
◆密封蓋的選擇:為確保防漏,當離心速度高于10000xg或者對有害物質進行離心時,本系列30ml和50ml的離心管通常使用密封蓋或者密封蓋裝置(可另購)。
Sealing caps available for 30mL and 50mL size to assure leakproof service especially at high speeds >10,000 × g or when spinning hazardous materials(sold separately).
◆適用溫度:Withstand temperatures from -100° to +150°C (-148° to +302°F).
◆配套轉子:幾乎對應貝克曼、久保田、日立、TOMY等所有離心機的轉子。
◆符合標準:符合美國OSHA血清抗病原體標準。
◆滅菌操作:在進行高溫高壓滅菌操作之前,將蓋子放置在離心管上,但不要按螺紋旋轉密封。
Before autoclaving, just set closure on top of the tube without engaging the threads.
◆預測試:在20000RCF以上使用時,一定要預先測試離心管。
◆關鍵特點:可高溫高壓滅菌,防生物危害,防漏,氟塑料. Autoclavable/Biohazard/Leakproof/PTFE FEP.
◆注意:離心時必須100%填滿離心管的量.Must be filled to at least 100% of the total capacity.
型號選擇Ordering Information:
訂貨號NG |
標稱容量 |
直徑×全長mm |
選配密封蓋型號 |
包裝數量 |
10 mℓ |
φ16×80 |
/ |
2個/盒,10個/箱 |
|
NG3114-0030 |
30 mℓ |
φ25.5×92 |
DS3131-0020 |
2個/盒,10個/箱 |
NG3114-0050 |
50 mℓ* |
φ28.5×104 |
DS3131-0024 |
2個/盒,10個/箱 |
備注: 訂貨號為NG3114-0050離心管實際滿裝容量為42ml,為標準離心機而設計。Order No. NG3114-0050 has a brim capacity of only 42mL but is designed to fit standard rotor.